LG washers are known for their reliability, energy efficiency, and cutting-edge technology. However, like any appliance, they can encounter issues over time. Understanding the error codes displayed on your LG washer can help you troubleshoot and resolve problems quickly. This guide will provide a comprehensive list of LG washer error codes and offer solutions to common issues.

Common LG Washer Error Codes

IE Error Code (Water Inlet Issue)

• Cause: The washer is not filling with water as expected.
• Solution: First, ensure the water supply is turned on. Inspect the inlet hoses for kinks, twists, or clogs. Clean the filters inside the inlet valve, as sediment buildup can obstruct water flow. Restart the cycle once the issue is resolved.

OE Error Code (Drainage Issue)

• Cause: The washer is unable to drain water from the drum.
• Solution: Inspect the drain hose for blockages or kinks. Clean the pump filter, which can accumulate lint or debris over time. If the problem persists, the drain pump may need to be replaced.

UE or UB Error Code (Unbalanced Load)

• Cause: The washer detects an unbalanced load during the spin cycle.
• Solution: Open the washer door and redistribute the clothes evenly inside the drum. Avoid overloading the washer and make sure the load is properly balanced. This issue may also occur if large items like blankets are washed without smaller items to balance them out.

DE Error Code (Door Lock Issue)

• Cause: The washer door is not locking properly.
• Solution: Ensure the door is fully closed and free of obstructions. Check the door lock mechanism for damage or wear. If necessary, replace the door latch or lock assembly.

LE Error Code (Motor Overload Issue)

• Cause: The motor is overloaded, often due to an excessive load or mechanical fault.
• Solution: Reduce the laundry load and try running a shorter cycle. If the error persists, reset the washer by unplugging it for 10 minutes and then restarting the cycle.

PE Error Code (Water Level Sensor Issue)

• Cause: The washer detects incorrect water levels during operation.
• Solution: Inspect the water level sensor for dirt or debris. Clean the sensor and check for damage. If cleaning does not resolve the issue, the sensor may need to be replaced.

Troubleshooting Tips

• Regular Cleaning: Clean the washer drum and detergent drawer regularly to prevent soap and detergent buildup.
• Filter Inspection: Inspect and clean the inlet filters every few months to ensure optimal water flow.
• Load Management: Avoid overloading your washer, as it can strain the motor and cause unbalanced load errors.

Maintenance Advice

• Use the Right Detergent: Always use the detergent recommended for your LG washer model. Excess suds can lead to drainage issues.
• Prevent Mold: Leave the washer door slightly open after use to allow the interior to dry, preventing mold buildup.
• Professional Maintenance: Schedule a yearly professional inspection to keep your washer running smoothly.

Key Takeaways

Proper care can help prevent issues and extend the lifespan of your LG washer.

Regularly check for clogs and debris in hoses and filters.

Ensure the washer is properly balanced and avoid overloading.